community
Concreters in Townsville 2026, Concrete Driveway and Slab Costs, and How to Find a Reliable Concreter Near You
Townsville concreter guide 2026: how much concrete driveways and slabs cost in Townsville, QBCC licensing, cyclone Wind Region C concrete requirements and 2019 flood lessons for Townsville homes, and how to find a reliable concreter near you.
How we reported this
Concreters in Townsville 2026
Townsville has a concreting market shaped by cyclone-rated construction requirements and the lessons of the 2019 monsoon flood event. QBCC licences concreting contractors for building work in Queensland, verify at qbcc.qld.gov.au. Townsville is in Wind Region C, all structural concrete must be designed to cyclone wind-load requirements, and the 2019 flood event reinforced the importance of appropriate floor heights and drainage design in residential construction.
How Much Does Concreting Cost in Townsville 2026?
- Concrete driveway (single car, 3m x 5m, supply and lay), typically $1,745-$3,372 in Townsville
- Concrete driveway (double car, 6m x 6m, supply and lay), typically $4,310-$8,680 in Townsville
- Exposed aggregate driveway (double car), typically $5,750-$11,780 in Townsville
- Concrete house slab (150sqm, standard ground floor), typically $16,900-$33,800 in Townsville
- Concrete footpath (per linear metre, 1.2m wide), typically $113-$213/lm in Townsville
- Concrete patio or entertaining area (per square metre), typically $82-$169/sqm in Townsville
- Retaining wall (concrete block, per linear metre), typically $620-$1,325/lm in Townsville
- Concrete removal and disposal (per square metre), typically $52-$104/sqm in Townsville
Townsville 2019 Flood Lessons and Cyclone-Rated Concrete
The 2019 Townsville monsoon flood (over 1,200mm of rainfall in 10 days) caused widespread damage to homes in low-lying areas, since then, Townsville City Council has updated flood overlay maps and floor level requirements for new construction and major renovations. New slabs in Townsville flood-affected areas must be set at the appropriate flood immunity level, confirm with your engineer and council before specifying slab height. All structural concrete in Townsville must meet Wind Region C cyclone standards, use licensed builders and engineers with cyclone-construction experience for structural concrete work in Townsville. qbcc.qld.gov.au
This article was compiled by AI and screened before publishing. See our editorial standards.